- HushMat Ultra Super Bulk sound-deadening kit
Reduces both road noise and vibration of low frequency noise from 0 Hz to 1 kHz,Reduces heat and thermal transfers by over 40%,Interior stays warmer in the winter and cooler in the summer, insulating up to 550°+F - Combination of aluminum foil constraining and viscoelastic polymer layers
R value: 7,Lightweight and super flexible—less than 1/8 in. thick and .47 lbs. per sq. ft.,Self-adhesive peel and stick—no glue required - Original equipment manufacturer approved
Installs in 1/2 the time versus other brands,Does not require surface prep; adhesion guaranteed—no alcohol or acetone wash needed, no installation tools required,Trims easily with standard razor knife or household scissors - OEM approved
Meets or exceeds automotive damping specs GMO149M (General Motors), WSB-M5G58-A1 (Ford) and MS-CD 629 Type C (Chrysler),Universal application—can be applied to firewall, floor pan, tunnel, doors, roof, rear wheel wells, trunk and quarter panels - Simple installation with self-adhesive design
No installation tools or surface preparation required.
-36%
HushMat – Super Bulk Sound-Damping Kit, 36 Sq. Ft. – Stealth Black Foil
$75.00 Save:$41.00(36%)
Available in stock
Description
Additional information
| Dimensions | 32 × 17 in |
|---|---|
| Mount Type | Adhesive |
| Manufacturer's Warranty - Labor | 1 Year |
| Color | Stealth Black Foil |
| Color Category | Black |
| Treatment Type | Acoustic panels |
| Product Name | Super Bulk Sound-Damping Kit, 36 Sq. Ft. |
| Material | Butyl Rubber |
| Brand | HushMat |
| Quantity | 9 |
| Product Length | 32 inches |
| Model Number | 10800 |
| Product Width | 17 inches |
| Manufacturer's Warranty - Parts | 1 Year |
| UPC | 881101108006 |
Reviews (1)
No products in the cart. 
CharlieBravo –
Sound deadening for 2009 Tacoma Access Cab: used 4 sheets inside the exterior panels for both front doors, wrap around both sides of 6×9 speaker openings, with some leftover bits filling in. Will tackle the rear doors later, but I’m impressed with just a light tap test between front and rear doors. The adhesive in this US-made product is very strong, so I cut 18″ long strips as wide/narrow as needed for ease of smoothing into place by hand before rolling. The exposed aluminum edge at each end of the 18″ strips make it easier to remove from the paper backing, so for shorter lengths, try to cut a strip in two lengths so you have an aluminum edge to start from. I’m glad I have the five sheets remaining! I didn’t take many photos, as this was a busy solo task in tight quarters.
I used a utility knife and steel square to cut the strips from the sheet, and 3M titanium scissors (Fiskars, but not those of a wife or girlfriend would work, too.)