- Compatible with most vehicles’ OEM audio systems
For use when adding aftermarket amplifiers to car audio systems without RCA preamp outputs or when replacing your vehicle’s factory radio and retaining the factory amplified audio system. - 2-channel or 4-channel input selection
Features 4-channel in and 4-channel out unfiltered or 2-channel in and 4-channel out unfiltered for integration with your existing audio system. Set to 2-channel if only using front left and front right inputs or 4-channel if using all inputs. - Auto turn-on mode selection
Choose between remote wire input or DC offset (3V – 7V turn on trigger) to automatically power the amplifier when the radio is turned on. - Dual variable stereo gain control with independent clipping indicator
Allows you to adjust the output signal from -28dB to +1dB and indicates signal clipping for both the front and rear when gain is set to high. - Selectable on-board load resistors
Including 20 ohms, 60 ohms, and 20k ohms impedance for newer factory-amplified vehicles. - 400W (40V) peak power input per channel @ 20k ohms
For high-quality sound. - 9.5V (RMS) maximum output voltage @ 13.8V
For efficient operation. - Selectable ground isolation
Choose from common, ISO (default), or 200 ohms. - 10Hz – 20kHz frequency response
Ensures faithful sound reproduction. - 110dBA signal-to-noise ratio @ 6.4V output
Enjoy crisp audio. - <0.01% Total Harmonic Distortion (THD) For clean sound.
- Up to 12dB bass boost (CH 3-4)
Customize your bass using the included LPA-REM remote bass level controller. - <250Hz low-pass filter (CH 3-4) Ensures flexible operation.
- 18AWG removable quick-connect with screw-type terminal
Provides secure connections. - Aluminum extrusion chassis and housing
Enables increased heat dispersion and durability. - Remote mounting bracket
Allows for flexible installation options.
-36%
PAC – LocPRO Advanced 2-Channel or 4-Channel Active Line Output Converter with Auto Turn-On – Black
$62.00 Save:$35.00(36%)
Available in stock
Description
Additional information
| Weight | 2.64 lbs |
|---|---|
| Dimensions | 3.15 × 6.92 × 0.93 in |
| Model Number | LPA-E.4 |
| Product Width | 6.92 inches |
| Product Height | 0.93 inches |
| Number Of RCA Outputs | 4 |
| Signal-to-Noise Ratio (SNR) | 110 decibels |
| Vehicle Compatibility | Universal |
| Color Category | Black |
| Output(s) | RCA |
| Manufacturer's Warranty - Parts | 1 year |
| Product Length | 3.15 inches |
| Maximum Input Voltage | 40 volts |
| Minimum Frequency Response | 10 hertz |
| Number Of Channels | 4 |
| Input(s) | Speaker Wire |
| Maximum Frequency Response | 20 kilohertz |
| Output Level Control | Adjustable |
| Manufacturer's Warranty - Labor | None |
| Product Weight | 2.64 pounds |
| Product Name | LocPRO Advanced 2-Channel or 4-Channel Active Line Output Converter with Auto Turn-On |
| Brand | PAC |
| Color | Black |
| Maximum Power Handling | 400 watts |
| UPC | 609098834827 |
Reviews (1)
No products in the cart. 
ghost16202 –
I liked that you could control the rear channels with the knob, but I really think that you should be able to control all four channels with the knob. Instead of just two channels. But I understand they do that because people use a subwoofer on the back two channels. But if you use all four channels for highs or mids it’s kind of pointless that u have the knob. also the little jumpers you pull them out by hand, and they fall out by their self and I’ve already lost one.