- Compatibility
MI-2781 supports 75mm x 75mm and 100mm x 100mm VESA patterns, screens up to 32″ and up to 22 pounds on each arm - Performance
Freestanding base – no clamping or desk mounting required - Tilt and Rotate
Stand arms tilt 80°, rotate 360° and raise and lower for precise positioning - Material
Made with high grade steel and aluminum - Cable Management
Cable clips help keep your space neat and organized. Store the included hex keys in the clip on the pole, so you can adjust the your monitors in a flash.
-53%
Mount-It! – Dual Monitor Desk Stand – Black
$14.00 Save:$15.00(53%)
Available in stock
Description
Additional information
| Swivel Capability | Yes |
|---|---|
| Number of Monitors Supported | 2 |
| Manufacturer's Warranty - Labor | 10-Year Warranty |
| Color Category | Black |
| Product Name | Dual Monitor Desk Stand |
| Tiltable | Yes |
| Brand | Mount-It! |
| Manufacturer's Warranty - Parts | 10-Year Warranty |
| Color | Black |
| Maximum Weight Capacity | 22 pounds |
| Model Number | MI-2781B |
| UPC | 818103028643 |
Reviews (30)
No products in the cart. 
NotYours7 –
If you’re working from home, buy it. It’s the best investment you can make. Add a comfy chair too.
Ramayo –
This stand is not functional. It is very heavy and feels sturdy, which is great. And it held both of my 28″ monitors and I didn’t feel like it would tip over. The problem is that the monitors droop. One side is worse than the other but neither would hold perfectly upright. I tightened them as much as I could where the instructions said but it did not work. I’m very annoyed because it took a lot of time to put the stand together and get both monitors mounted, only to have to take it all apart and take it back to the store. I looked at reviews for this same stand on other sites and this is not an uncommon problem. Beware.
MOHAMED –
Great stand for budget friendly buyers. Great quality and easy to use.
Hello –
Great product, buy it. I read reviews indicating it droops and tips over. I can see how that could happen if you do not tighten all the nuts and bolts especially on the swivel arm. I myself experienced the drooping until I figured out how to tighten everything. I successfully installed two 27” Samsung monitors with their original stands (which I will remove). I elected the freestanding option (no drilling holes and mounting it to the desk) the only tool I used of my own was a Phillips screwdriver. All the tools are there if you elect to affix the stand onto the desk. This was a great buy and savings considering I was going to purchase the other dual monitor desk for $250.00. PS. I am a bit assembly challenged and for those of you who share my lack of a gift this is a project you can tackle ) LOL.
2048 –
Works well with two 24″ monitors. Easy to setup and maintain
DeeMan –
A very stable stand very secure it was a 24 inch in my 32 inch very well great stand I like it a lot.
Jordan –
Just received this stand today and none of the screws work with my VESA compatible monitor. Either too small of threads or too small in diameter, the screws slide right in and out. I want to love this stand but as it is, it’s unusable ,
junior –
somewhat cheaply made, after 2 months of use it broke.
JeraldB –
Works great. Inexpensive and easy to set-up
SweatGawd –
Got a great deal in this stand, but ended up returning it. I have a smaller desk and it takes up as much space as I saved by having the monitors off the desk top. Super great build and quality however, and easy to put together. In the right setting this would be a great stand.
princessnjj –
Works great, it can be a bit confusing i didnt have directions. I had one before so i kinda knew where things went. Solid product. Has no bells and whistles like for adjusting..i sugets get them where you want them and then your good
BigB77 –
Sleek and hold my computers very comfortably, cheaper also.
Sabasqueeee –
I did see a few people having issues with the weight, as soon as i got everything hooked up, i had to tighten it so it doesnt sag low
AntonioS –
Returned the item, design and quality is poor and not stable to handle the two monitors.
Graphyte –
Very sturdy monitor stand that uses either a heavy free-standing base or hardware that bolts thru a hole in the desktop.
StaceyS –
Does the trick nicely for dual monitors.
An inexpensive solution for the home office.
DefTechFan –
Works as advertised. Second one purchased. No issues.
JoeyH –
It was top heavy for 2 22 inch monitors, do not recommend
user139136 –
Assembly was relatively easy and works great. The stand alone can easily support my 2 relatively heavy monitors. Comes with clips to organize cords, which is also handy.
AraL –
I love it and it has not given me any problems at all. It is a really good sturdy and I would absolutely bad again if I needed to.
AmberB –
Mine came with pieces welded together incorrectly so i was unable to slide the monitor over the piece that its supposed to slide over and connect to because it was built sideways.
Xboxguy –
The stand is a waste of money. The clamp that holds the monitor arms to the vertical pole doesn’t tighten enough so the monitors will lower if you put pressure on it.
My new desk at work has a back underneath so I can’t use any clamp style stands. I was hoping this stand might work well. It’s pretty useless when using the flat base (as opposed to the clamp that also comes as an option). If you try to move one of the monitors the whole thing slides.
TheConflictpro –
Very well built stand with cord control, adjustments for each monitor, and it was very value priced.
hussein –
Excellent product. Comes in handy and lets me do my job better!
LDC1 –
Solid mounting and adjustments, however, the stand isn’t heavy enough and stand tends to fall over when monitors are attached. I had to weigh the base down with books to keep it balanced.
BarbaraK –
I don’t if I got a defective one, but I am returning it. It does not hold up both monitors even though you tighten it as much as you can. The minute you touch the monitor, they all slide down the pole. Very frustrating I absolutely hate it and wouldn’t recommend wasting your money on this.
Elliot –
Holds both my monitors well. Make sure to screw the bolts in TIGHT. At first I thought it was too weak to hold them but if you really put some elbow grease into it, they are held up great.
Tradigital –
Handy for two monitors. Footprint is kind of large.
Rarelycook –
It is a very good product. I was worrying about it not holding the monitors upright like some reviewers has pointed out but I do not have that problem at all. The assembling instruction is minimal and not clear. I had to watch youTube to figure out which side of the arm is facing down. That’s the first monitor arm I purchase and I was not disappointed.
JBell –
This product works well with two 27″ computer monitors