- Architecture
The foundation of the No 585.5 is its fully discrete, mirror-imaged, dual-mono analog circuitry featuring individual signal switching relays. The fully-differential Class AB power stage includes an oversized toroidal transformer with individual windings for the left and right channels. - Amplification
Each amplifier channel uses 12 output transistors and multiple smaller local capacitors that allow them to be placed closer to the amplifiers for greater transient response when power is needed immediately. This architecture results in a conservative power rating of 200W per channel. - Pure Phono
The Pure Phono stage is a discrete design with no op-amps and operates exclusively in class A throughout, employing tantalum nitride thin-film resistors and polypropylene capacitors with exceptionally low tolerances. - Fixed-gain Moving Magnet (MM) Section
With five capacitive cartridge-loading settings, and a moving coil (MC) section with three gain settings and 10 resistive cartridge-loading settings ensures optimization for any cartridge. And an ultrasonic filter intelligently compensates for rumble and warping. - Digital Audio
An ESS Sabre 32-bit D/A convertor with jitter elimination circuitry, and balanced, discrete IV circuitry forms the digital audio section. Five power supplies are dedicated to this digital processing stage while four power supplies are dedicated to the L and R analog output circuits. - High Resolution Audio
Six digital audio inputs are provided including one AES/EBU, two coaxial and two optical plus a USB audio processor capable of asynchronous data transfer of high res DSD and PCM files at up to 192kHz/32 bits resolution. - Clari-Fi
For low-resolution audio formats, proprietary Clari-FiTM signal processing reconstructs information and bandwidth lost in compressed file formats restoring them to higher fidelity. - Construction
The chassis of the Nº 585.5 utilizes card-cage steel and aluminum architecture to isolate critical low-level analog and digital circuitry from the power supplies and amplifier modules, including its intuitive twin-knob control system. Designed and hand-crafted in USA. - Connectivity
5 analog inputs: XLR, 3 x RCA, Phono; 6 digital inputs: Asynchronous USB (B), AES/EBU, 2 x optical S/PDIF, 2 x coaxial S/PDIF
-36%
Mark Levinson – No585.5 700W 2-Ch. Class AB Fully Discrete Integrated Amplifier – Black
$9,360.00 Save:$5,264.00(36%)
Available in stock
Description
Additional information
| Weight | 72 lbs |
|---|---|
| Dimensions | 19.95 × 17.25 × 7.59 in |
| Total Harmonic Distortion | 0.01 percent |
| Product Depth | 19.95 inches |
| Amplifier Class | AB |
| Color | Black |
| High-Pass Crossover | Selectable |
| Line-Level Inputs | Yes |
| Preamp Outputs | Yes |
| Manufacturer's Warranty - Labor | 5 years |
| Continuous Watts x Channel @ Ohms | 200 x 2 @8 |
| Input(s) | RCA |
| Maximum Watts x Channel @ Ohms | 350 x 2 @4 |
| Manufacturer's Warranty - Parts | 5 years |
| Product Weight | 72 pounds |
| Model Number | MLNO585P5AM |
| Signal-to-Noise Ratio (SNR) | 103 decibels |
| Number of Channels | 2 |
| Maximum Frequency Response | 20 kilohertz |
| Minimum Frequency Response | 20 hertz |
| Product Height | 7.59 inches |
| Product Name | No585.5 700W 2-Ch. Class AB Fully Discrete Integrated Amplifier |
| Brand | Mark Levinson |
| Total Power Handling | 1000 watts |
| Color Category | Black |
| Product Width | 17.25 inches |
| UPC | 050667372378 |
No products in the cart. 
Reviews
There are no reviews yet.