- Handles up to 1200W peak power (600W RMS)
For rich, powerful sound. - 24-100Hz frequency response
For accurate sound reproduction. - 86.8dB sensitivity
Picks up the highs and lows for faithful reproduction of your audio. - 9-5/16″ mounting length and width; 6-1/4″ mounting depth
For the right fit. - 10″ injection-molded polypropylene cone
With high-excursion ribbed Santoprene surround for deep, expressive bass. - 4 ohms impedance
Conducts power evenly to keep the speaker at an appropriate level. - SoloKon 360° constant-contact back bracing
Adheres directly to every contour of the woofer cone to maximize the motor’s mechanical coupling, thus maintaining precise linear excursion while improving the woofer’s responsiveness. - UniPlate back plate and pole piece
Are a single, solid unit, which allows heat to move away from the motor. Venting below the spider allows even more air to move, and heat to escape. - Dual voice coils
With high-temperature copper windings handle extreme power levels for long durations without burning out for reliable performance. Heavy-duty speaker leads are stitched and glued to the spider rolls for dependability. - Corner Ribs minimize distortion
And delivers durability and uncompromised sound quality. - Choosing the right materials makes all the difference
Heavy duty tinsel. A thick, semi-progressive spider. Dual high-temperature voice coils. Ceramic magnets. All this technology comes together to get the juice exactly where it needs to go.
-42%
KICKER – Solo-Baric L7S 10″ Dual-Voice-Coil 4-Ohm Subwoofer – Black
$121.00 Save:$88.00(42%)
Available in stock
Description
Additional information
| Weight | 9.4 lbs |
|---|---|
| Dimensions | 6.25 × 10 × 10 in |
| Enclosed | No |
| Maximum Frequency Response | 0.1 kilohertz |
| Product Weight | 9.4 pounds |
| Manufacturer's Warranty - Labor | 1 year |
| Product Width | 10 inches |
| Manufacturer's Warranty - Parts | 1 year |
| Product Depth | 6.25 inches |
| Color | Black |
| Model Number | 44L7S104 |
| Integrated Amplifier | No |
| Peak Power Handling | 1200 watts |
| Impedance | 4 ohms |
| Woofer Size | 10" |
| Dual Voice Coils | Yes |
| Sensitivity | 86.8 decibels |
| Woofer Surround Material | Santoprene |
| Color Category | Black |
| Product Height | 10 inches |
| Product Name | Solo-Baric L7S 10" Dual-Voice-Coil 4-Ohm Subwoofer |
| Woofer Composition | Injection-Molded Polypropylene |
| Brand | KICKER |
| Minimum Frequency Response | 24 hertz |
| RMS Power | 600 watts |
| Mount Depth | 6.25 inches |
| Frame Material(s) | Cast |
| UPC | 713034081203 |
Reviews (3)
No products in the cart. 
Effervescentsoul –
Great speakers! I’m running two of these in a split sealed enclosure at a ratio of 1:1.15 each at 2 Ohm using the dual feature. My vehicle has sound treatment throughout including the trunk and fully on the undercarriage. This has added to the quality of the already great sound of these speakers. Using the kicker bass gain ($35 ish add on) knob I’m able to increase/decrease the amount of fast bass that i prefer. I conveniently have s pass through of about 10” X 6” in the rear seating and rear dash. This has improved the audible bass est. 80-90 hrz and up to enter the cabin with ease. This is why i chose these speakers. At a loss of only 2.3 cubic feet the enclosure takes up minimal space, hits hard, fast and won’t overheat… win win win. I listen to several types of music, literally from classical to metal to pop and ol school 90’s rap. These speakers fill my need for the low end that was lacking. If your shopping mid sized subs, check these out and watch for them to go on sale. Cheers
370Z –
Sounds amazing!!! Have a Kicker 1200W pushing it. Two 12’s is overkill , this 1 speaker will blow your mind!
Felix –
Hits hard and been holding up very well.
Just have one and it sounds just as loud as my buddies 2 12s in his car