- Compatible with most 17″ to 32″ flat-panel monitors
Designed for any desk edge or grommet hole up to 2″ thick, the mount supports monitors weighing 3.3 to 16.5 lbs. (per arm), with common VESA sizes of 75×75 or 100×100. - Gas shock system
The gas shock arms allow for height adjustments to be made with minimal effort. Freely raise or lower your screens to improve line of sight and reduce neck strain. - Various positions
This mount allows for varied viewing positions. With four points of rotation, you can easily swivel your monitors 360°, tilt them 25° up and down, and rotate them into portrait or landscape orientation. - Cable management
To keep your desktop clutter-free, use the provided cable management clips to conveniently route your cables. - Easy installation
To make installation more manageable, the base of the mount can be detached from its support arms and secured entirely from the top of your desk.
-36%
Kanto – DMS Series Dual-Arm Desktop Monitor Mount – Silver
$21.00 – $139.00
Available in stock
Description
Additional information
| Dimensions | 22 in |
|---|---|
| Color | Black, Silver |
| Mount Location | Desktop |
| Rotation | 360° |
| Product Height | 22 inches |
| Maximum Weight Capacity | 16.5 pounds |
| Hardware Included | Yes |
| Manufacturer's Warranty - Labor | 2 years |
| Color Category | Silver |
| Product Name | DMS Series Dual-Arm Desktop Monitor Mount |
| Maximum Television Size | 32 inches |
| Mount Material | Aluminum |
| Brand | Kanto |
| Assembly Required | Yes |
| Number of Monitors Supported | 2 |
| VESA Wall Mount Standard | 100mm x 100mm |
| Compatibility | Most flat-panel monitors from 17" to 32" with VESA sizes of 75×75 and 100×100 |
| Mount Style | Arm |
| Manufacturer's Warranty - Parts | 2 Years |
| Tilt | ±25° |
| Model Number | DMS2000S |
| Mount Profile | Low Profile |
| UPC | 800152718088 |
Reviews (7)
No products in the cart. 
MBeezley –
I’m using this mount to hold a 28″ ASUS monitor, and 27″ Samsung G7 that came with this same order. Setup took less than 20 minutes, and that’s including setting up the new monitor. When I bought this I was worried I would have to take the top part of my desk off in order for it to fit properly, but these angle perfectly, and fit like a glove.
At first I thought I was going to return this desk mount. One monitor was sagging down, but I just had to tighten the adjustment screws behind the monitor. There are 3 screws where this mount has an adjustment ball behind the monitor. They are a pain to get to, but realized I could move my monitor in different directions to access each screw. (If I did it again I would tighten those screws before putting the monitor on it.) You have to tighten those screws to hold the weight of your monitor, but not too tight to where you can’t move it. After that I can freely move my monitors where I want them, at any angle, and it holds perfectly in place. They are high quality, and heavy duty. I’m sure these will last for the rest of my life. I’m very satisfied paying the price I paid for this product.
SurfacePro –
Great item easy to install and set up quality built i have two 32″ monitors on these and it holds up great , mounting brackets work great yes i would buy again
Mike –
This is a great mount. Rock solid and very adjustable.
PCampas –
I like the overall build of the base & arms. The design is unique and stands-out; built to maintain its structural integrity. The piece attached to the vesa mount really lacks in quality in comparison to the other parts though. Also there is too much screen wobble for this price point. Calibration and adjustment is frustratingly disappointing. It ends up degrading the overall value and leaves your setup lacking the fine-tuned articulation you aimed for. It’ll require more time and attention that I currently don’t have to spare.
Bwhit89 –
Works flawlessly on a thin tempered glass desk. One 27″ LG Ultragear on the left with my Series X and one 32″ Samsung G8 Odyssey on the right for my Rog Strix. The G8 Odyssey is definitely at the bar for weight though for anybody wondering.
Pappap12 –
The Kanto Dual-Arm monitors are perfect for office or work-at-home environments. Installation was very straightforward, and depending on the desk type, there are different options to anchor. I have a sit-stand desktop and different monitors, and it works beautifully.
Fionne –
I recently purchased Kanto’s DMS Series Dual-Arm monitor mount and I’m thoroughly impressed. The setup was refreshingly simple and straightforward. The quality and build of this stand are exceptional, providing a sturdy and reliable foundation for my 34″ ultrawide monitor and 27″ monitor. It fits my needs perfectly, especially since my desk is against the wall. The cable management system is a game-changer, creating a sleek and organized look while maximizing desk space. I highly recommend this dual monitor stand for anyone looking to optimize their workspace.