Verizon LTE SIM Card for DroneMobile X1 – White

Customer Reviews (1)

1. 

   MikeT – November 14, 2022

   Rated 5 out of 5

   Works as described/intended. The only annoying part is the included instructions for activation is incorrect and Firstech customer service also provided the incorrect activation instructions.
   After wasting hours messing around, trying and failing to get the Drone to activate to the Verizon SIM, I was finally able to dig up instructions posted online on how to do it.
   Note* this is for Drones that are already activated and being used with the AT&T SIM.

   1. Unplug Drone
   2. Remove AT&T SIM
   3. Install Verizon SIM
   4. Get a paper clip or something just as small
   5. On the side opposite of the cables, find the little pin hole just big enough for a paper clip towards the top side of the Drone. This is a reset button. Stick the paper clip in and you should feel a click, then you’ll know you have the right spot. Release the button.
   6. Turn vehicle on (I had mine running when I did this)
   7. Plug the Drone back in
   8. Within 10 seconds of plugging it in press the little reset button 2 short times and then press and hold for about 15 seconds on the third press. So the button order is Click, click, hold – 12-15 seconds.
   9. Release the button
   10. After about 60 seconds to 3 minutes you should see the red power light go solid and the LTE and GPS lights return to normal. It should now be activated!

   Hope this helps some people and saves some time!

   Aside from bad instructions, it works great!